93 – C610/C711 User’s Guide
5. With the colored toner release lever (1) to the right, pull the
lever towards you. This will release the bond between the
toner cartridge and the image drum unit.
6. Lift the right-hand end of the toner cartridge (1) and then
draw the cartridge to the right to release the left-hand end as
shown (2), and withdraw the toner cartridge out of the image
drum cartridge. Place the cartridge on a piece of paper to
avoid marking your furniture.
7. Take the new image drum cartridge out of its packaging and
place it on the piece of paper where the old cartridge was
placed. Keep it the same way round as the old unit. Pack the
old cartridge inside the packaging material for disposal.
Note:
Follow instructions that come with the new image drum
for additional information such as the removal of
packaging material etc.
1
2
1
To Next Page
Loading...
Need help?
General
