EasyManua.ls Logo

Oki C910 - User Manual

Oki C910
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User’s Guide
C910
moc.atadiko.ym
59102301

Table of Contents

Other manuals for Oki C910

Questions and Answers

  • M
    moracoreyAug 19, 2025
    How to clean dirty feed roller on Oki C910 Printer?
    • S
      Stephanie JohnsonAug 19, 2025
      If your Oki printer's feed roller is dirty, wipe the roller with a cloth moistened with water.
  • R
    Richard OsbornAug 21, 2025
    How to fix vertical white lines on Oki Printer?
    • A
      Amy SpencerAug 21, 2025
      If you see vertical white lines on the printed page from your Oki Printer, it could be due to several reasons: * The LED head might be dirty. Try wiping it with an LED lens cleaner or a soft cloth. * The toner could be low. Consider replacing the toner cartridge. * There might be foreign materials in the image drum. Replacing the image drum cartridge could solve this. * The light-shielding film of the image drum cartridge might be dirty. Try wiping the film with a LED lens cleaner or a soft cloth.
  • A
    Amy YoungAug 23, 2025
    Why is my Oki Printer printing so light?
    • M
      Michele YoungAug 23, 2025
      If your Oki Printer is printing too lightly, here are a few things to check: * Make sure the toner cartridge is properly seated. Try reinstalling it. * The toner might be low, so consider replacing the toner cartridge. * The paper could be moist. Use paper stored in proper temperature and humidity conditions. * The paper might not be suitable for the printer. Use recommended paper. * The paper thickness and type might be inappropriate. Set a proper value for [Media Weight] and [Media Type] in the menu setup, or set one value thicker for [Media Weight].
  • K
    Kimberly JohnsonAug 26, 2025
    How to fix paper jam in duplex unit of Oki C910?
    • S
      Sarah SmallAug 26, 2025
      To resolve a paper jam in the duplex unit of your Oki printer: * If a Finisher unit is attached, operate the lever of the Inverter unit to separate the Inverter from the printer. Operate the duplex cover release button and open the cover. Carefully remove any jammed paper. Operate the levers and pull out the duplex unit. * Holding the front top cover by the grip, push it gently inwards and raise it. Remove any jammed paper. In similar manner, check for and clear any paper jammed under the rear top cover. Replace the two top covers.
  • H
    hendersonchristopherAug 28, 2025
    What to do if there is a paper jam in side cover of Oki C910 Printer?
    • N
      njacksonAug 28, 2025
      To resolve a paper jam on the side cover of your Oki printer: * If the MP Tray is open, close it. * Pull the release lever and pull open the side cover. * Carefully remove the jammed paper. * Close the side cover.
  • F
    fgutierrezAug 30, 2025
    How to clear paper jam on Tray 1 side cover of Oki C910?
    • M
      Michelle MitchellAug 30, 2025
      To resolve a paper jam on the Tray 1 side cover of your Oki printer: * Squeeze the catch on Tray 1 side cover and open the cover. * Carefully remove the jammed paper. * Put the paper guide back into position and close Tray 1 side cover.
  • M
    Mackenzie HubbardSep 2, 2025
    What to do if Oki C910 Printer shows 'Check Finisher, paper jam/paper remains'?
    • J
      Jamie TapiaSep 2, 2025
      If your Oki Printer indicates a paper jam or paper remains in the Finisher, follow these steps: * Press the Help button on the printer control panel to check the number displayed. You will need this to be able to clear the paper jam. Remove any paper at the Finisher paper exit. * Operate the Finisher lever and move the Finisher away from the Inverter. Open the Finisher top cover. Carefully remove any jammed paper. Close the Finisher top cover.
  • D
    Dennis HoffmanSep 4, 2025
    How to clear paper jam in Inverter of Oki C910 Printer?
    • B
      Brian RiosSep 4, 2025
      To resolve a paper jam in the Inverter of your Oki printer: * Operate the Finisher lever and move the Finisher away from the Inverter. Squeeze the recessed handle and open the left side cover of the Inverter. Carefully remove any jammed paper. Close the Inverter left side cover. * Operate the Inverter lever and separate the Inverter from the printer. Open the right side door of the Inverter. Remove any jammed paper. Close the right side door.
  • A
    Amy SmithSep 6, 2025
    How to level an Oki Printer?
    • A
      Ashley PetersenSep 6, 2025
      If your Oki printer is not level, place it on a steady, level surface.
  • J
    jeffreyvalentineSep 8, 2025
    What to do when Oki Printer uses inappropriate print media?
    • C
      Corey HernandezSep 9, 2025
      If your Oki printer uses inappropriate print media: * If your print media is too light or too heavy, use appropriate media. * If your print media is damp or charged with static electricity, use media that has been stored in appropriate temperature and humidity conditions. * If your print media is creased or curled, use appropriate media; decurled media can be used. * Remove the sheets, jog them into alignment and reload them. * Adjust the paper stop and paper guides of the tray, or the manual feed guide on the MP Tray to align the media properly.

Summary

Copyright and Legal Information

Disclaimer Notice

Manufacturer's disclaimer of responsibility for errors and omissions in the guide.

Trademark Acknowledgements

Lists registered trademarks of various companies mentioned in the guide.

Safety and Operational Notes

Illustrations Guidance

Explains that illustrations are representative and may differ from the actual unit.

Introduction to the C910 Printer

Printer Features Overview

Highlights key capabilities such as print speed, resolution, and connectivity.

Available Printer Options

Lists optional hardware like duplexer, HDD, and extra trays.

Tray and Feeder Configurations

Details possible configurations of paper trays and the High Capacity Feeder.

Printer Overview

Opening and Closing the Top Cover

Provides step-by-step instructions for accessing the printer's interior.

Identifying Major Components

Labels and describes the main external and internal parts of the printer.

Paper Handling and Recommendations

Paper Recommendations

Advises on suitable paper types, weights, and special media for optimal printing.

Paper Input;Output Guide

Details paper types, sizes, weights, and their corresponding input/output locations.

Tray and Feeder Configurations

Explains the capacity and usage of Tray 1, optional trays, and the MP Tray.

Paper Exits and Loading Procedures

Covers face-down/face-up stackers, duplex unit, and how to load paper trays.

Control Panel Operation

Control Panel Overview

Describes the swiveling control panel and its main sections.

Buttons and Lights Explained

Details the function of each button and indicator light on the control panel.

Display Panel Messages

Explains different types of messages shown on the printer's display panel.

Navigating Printer Menus

Guides users on how to use the control panel buttons to access and operate menus.

Getting Started

Printer Location Requirements

Specifies the necessary space around the printer for proper operation and access.

Printer Power Management

Instructions for safely turning the printer on and off, with and without a hard disk drive.

Changing Display Language

Explains how to change the default language of the printer's display.

Checking Current Printer Settings

Describes how to print a configuration report to verify settings.

Interfaces and Connection Options

Outlines the available data interfaces (Parallel, USB, Ethernet) for connecting the printer.

Consumables and Maintenance

Checking Consumable;Maintenance Item Usage

Guides users on how to check the remaining life of consumables via the menu system.

Replacement Indications and Schedule

Explains how the printer signals low consumables and provides replacement guidelines.

Consumable Item Order Information

Provides a list of consumables with their order numbers and expected life.

Maintenance Item Order Information

Lists maintenance items, their expected life, and order numbers.

Cleaning Procedures

Step-by-step guides for cleaning LED heads, paper feed rollers, and printer housing.

Emptying the Punch Chip Box

Instructions for safely emptying the punch chip box of the optional punch unit.

Optional Accessories

Available Optional Accessories

Lists accessories like duplex units, RAM, hard drives, and finishers.

Accessory Order Information

Provides order numbers for various optional accessories.

Installing Optional Accessories

General guidance on installing accessories and checking successful installation.

Troubleshooting

General Troubleshooting Advice

Basic steps for resolving display issues or connectivity problems.

Printer Paper Jam - Tttttt Side Cover

Instructions for clearing paper jams when the display shows "tttttt side cover".

Printer Paper Jam - Side Cover

Instructions for clearing paper jams accessed via the side cover.

Printer Paper Jam - Top Cover

Instructions for clearing paper jams accessed via the top cover.

Paper Jams - Duplex Unit

Steps to clear paper jams specifically within the duplex unit.

Paper Jams - Finisher

Procedures for clearing paper jams related to the finisher accessory.

Avoiding Paper Jams

Summarizes common causes of paper jams and suggests remedies.

Dealing with Unsatisfactory Printing

Diagnoses and provides solutions for common print quality issues.

Specifications

General Printer Specifications

Details dimensions, weight, print speeds, resolution, and memory.

Power and Environmental Specifications

Covers power consumption, operating environment, and noise levels.

Appendix A - Display Panel Messages

Appendix B - Menu System

Menu Structure Overview

Outlines the top-level menus and provides context for menu trees.

Configuration Menu Details

Explains how to view page counts and finisher counts within the configuration menu.

Supplies Life Information

Details how to check the remaining life of consumables like drums, belts, and toner.

Network Settings Overview

Describes items related to network configuration such as IP address and MAC address.

Paper Size and System Settings

Covers settings for paper size in trays and general system information like serial numbers.

Print Information Examples

Explains how to print configuration details and demo pages.

Tray Configuration Menu

Details settings for paper feed, auto tray switch, and custom paper sizes.

System Adjust Menu

Covers power save time, jam recovery, error reports, and print position adjustments.

Oki C910 Specifications

General IconGeneral
Print Resolution1200 x 1200 dpi
Monthly Duty Cycle150, 000 pages
ConnectivityUSB 2.0, Ethernet, Wi-Fi
Duplex PrintingYes
Supported Operating SystemsWindows, macOS, Linux
Paper SizeLetter, Legal, Envelopes
Printer TypeColor Laser Printer

Related product manuals