To Next Page
M
moracoreyAug 19, 2025
How to clean dirty feed roller on Oki C910 Printer?
- SStephanie JohnsonAug 19, 2025
If your Oki printer's feed roller is dirty, wipe the roller with a cloth moistened with water.
How to clean dirty feed roller on Oki C910 Printer?
If your Oki printer's feed roller is dirty, wipe the roller with a cloth moistened with water.
How to fix vertical white lines on Oki Printer?
If you see vertical white lines on the printed page from your Oki Printer, it could be due to several reasons: * The LED head might be dirty. Try wiping it with an LED lens cleaner or a soft cloth. * The toner could be low. Consider replacing the toner cartridge. * There might be foreign materials in the image drum. Replacing the image drum cartridge could solve this. * The light-shielding film of the image drum cartridge might be dirty. Try wiping the film with a LED lens cleaner or a soft cloth.
Why is my Oki Printer printing so light?
If your Oki Printer is printing too lightly, here are a few things to check: * Make sure the toner cartridge is properly seated. Try reinstalling it. * The toner might be low, so consider replacing the toner cartridge. * The paper could be moist. Use paper stored in proper temperature and humidity conditions. * The paper might not be suitable for the printer. Use recommended paper. * The paper thickness and type might be inappropriate. Set a proper value for [Media Weight] and [Media Type] in the menu setup, or set one value thicker for [Media Weight].
How to fix paper jam in duplex unit of Oki C910?
To resolve a paper jam in the duplex unit of your Oki printer: * If a Finisher unit is attached, operate the lever of the Inverter unit to separate the Inverter from the printer. Operate the duplex cover release button and open the cover. Carefully remove any jammed paper. Operate the levers and pull out the duplex unit. * Holding the front top cover by the grip, push it gently inwards and raise it. Remove any jammed paper. In similar manner, check for and clear any paper jammed under the rear top cover. Replace the two top covers.
What to do if there is a paper jam in side cover of Oki C910 Printer?
To resolve a paper jam on the side cover of your Oki printer: * If the MP Tray is open, close it. * Pull the release lever and pull open the side cover. * Carefully remove the jammed paper. * Close the side cover.
How to clear paper jam on Tray 1 side cover of Oki C910?
To resolve a paper jam on the Tray 1 side cover of your Oki printer: * Squeeze the catch on Tray 1 side cover and open the cover. * Carefully remove the jammed paper. * Put the paper guide back into position and close Tray 1 side cover.
What to do if Oki C910 Printer shows 'Check Finisher, paper jam/paper remains'?
If your Oki Printer indicates a paper jam or paper remains in the Finisher, follow these steps: * Press the Help button on the printer control panel to check the number displayed. You will need this to be able to clear the paper jam. Remove any paper at the Finisher paper exit. * Operate the Finisher lever and move the Finisher away from the Inverter. Open the Finisher top cover. Carefully remove any jammed paper. Close the Finisher top cover.
How to clear paper jam in Inverter of Oki C910 Printer?
To resolve a paper jam in the Inverter of your Oki printer: * Operate the Finisher lever and move the Finisher away from the Inverter. Squeeze the recessed handle and open the left side cover of the Inverter. Carefully remove any jammed paper. Close the Inverter left side cover. * Operate the Inverter lever and separate the Inverter from the printer. Open the right side door of the Inverter. Remove any jammed paper. Close the right side door.
How to level an Oki Printer?
If your Oki printer is not level, place it on a steady, level surface.
What to do when Oki Printer uses inappropriate print media?
If your Oki printer uses inappropriate print media: * If your print media is too light or too heavy, use appropriate media. * If your print media is damp or charged with static electricity, use media that has been stored in appropriate temperature and humidity conditions. * If your print media is creased or curled, use appropriate media; decurled media can be used. * Remove the sheets, jog them into alignment and reload them. * Adjust the paper stop and paper guides of the tray, or the manual feed guide on the MP Tray to align the media properly.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Monthly Duty Cycle | 150, 000 pages |
| Connectivity | USB 2.0, Ethernet, Wi-Fi |
| Duplex Printing | Yes |
| Supported Operating Systems | Windows, macOS, Linux |
| Paper Size | Letter, Legal, Envelopes |
| Printer Type | Color Laser Printer |
