94 – C910 Appendix B – Menu system
Appendix B – Menu system
The top-level Functions menus are:
• Configuration
• Print Information
• Print Secure Job
•Menus
•Admin Setup
•Calibration
•Print Statistics
The two other special top-level menus are:
• Boot Menu
•System Maintenance
The following tables summarise the Configuration, Print
Information, Print Secure Job and Menus menu trees and provide
some usage examples. The menu trees are given to the lowest
menu item level. Typically, this can be a parameter that can be set
by selecting from a range of values provided or a command that
can be executed to display or print a status or setting value.
Emboldened values followed by an (A) denote default values
associated with locations where A4 is default paper size.
Emboldened values followed by an (L) denote default values
associated with locations where Letter is default paper size.
Emboldened values followed by neither (A) nor (L) denote
common defaults.
Certain menus and items associated with, for example, the
Finisher appear only if the associated hardware is installed or
under certain conditions.
The remainder of the menus above are intended for more
specialized usage and are not described further here. For full
details of using all menus to configure and use the printer, refer to
the Network and Configuration Guide.
To Next Page
Loading...
Need help?
General
