EasyManuals Logo

Oki C810n User Manual

Oki C810n
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Network User’s Guide
86
5. Type 1 and press the Enter key. Perform the following
settings:
Please select (1- 99)? 1
No. Message Value
1 : TCP/ IP protocol : ENABLE
2 : IP address : 192.168.20.127
3 : Subnet Mask : 255.255.255.0
4 : Gateway address : 192.168.20.1
5 : RARP protocol : DISABLE
6 : DHCP/ BOOTP protocol: DISABLE
7 : Auto IP Address : DISABLE
8 : DNS Server (Pri.) : 0.0.0.0
9 : DNS Server (Sec.) : 0.0.0.0
10 : root password : “******“
11 : Auto Discovery Setup
99 : Back to prior menu
Please select (1- 99)?
6. Logout from the network interface. Turn the printer off
for about 15 seconds and on again to validate the
settings.
LPD Printing
Line Printer Daemon (LPD) is the most common protocol for
printing with TCP/IP to a network printer. Refer to the
workstation’s manual for details of lpr and lp commands. The
following explanation in this section uses the printing of print
file test.prn with printer name Myprinter_lp as an example.

Table of Contents

Other manuals for Oki C810n

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki C810n and is the answer not in the manual?

Oki C810n Specifications

General IconGeneral
BrandOki
ModelC810n
CategoryPrinter
LanguageEnglish

Related product manuals