Important!
As a precaution, it is recommended that you keep
backup copies of any permanent data (such as
forms or fonts) you store on the hard disk drive
(HDD).
In the unlikely event that the HDD or the printer
control board becomes damaged, the data on the
HDD will be lost.
Once this Data Protection Kit is installed in your
printer:
If the HDD becomes damaged
• Both the HDD and the printer control board
must be replaced.
The printer control board can only be used with
the Data Protection Kit HDD installed.
Note: For printer control board replacement,
contact your Oki Data dealer.
To Next Page
Loading...
Need help?
General
