Oki C844 Series - Page 9

47074403TH Rev.1
10 /
Oki Data CONFIDENTIAL
1. PARTS REPLACEMENT
(3) For the paper cassette, push two tabs of the Retard Cover in the direction of the
arrow, and open the Retard Cover by rotation to the back of the paper cassette.
Ta b
Retard Cove
r
Retard Cove
r
(4) Remove the Retard Roller Assy in the direction of the allow. And then, the
Spring Retard is removed with it.
RetardRoller
SpringRetard
(5) Clear the paper feed roller counter of the tray whose paper feed rollers were
replaced.
From [Admin Setup] - [Others Setup] - [Paper Feed Roller Counter Clear], select
the tray whose paper feed rollers were replaced and press the <ENTER> button.
[ Note for assembling of the feed roller ]
(1) Make sure to assemble with twirling the new Roller-Pick-Up (with Gear) to the
shaft of the back side of the printer's main body.
(2) Make sure to assemble with twirling the new Roller-Feed (without Gear) to the
shaft of the front side of the printer's main body.
Check these rollers without moving along each shaft.