C9600 User’s Guide> 102
A
PPENDIX
A – D
ISPLAY
P
ANEL
M
ESSAGES
The display panel messages are intended to be self-explanatory.
Representative messages are given as examples below.
MESSAGE COMMENT
Ready to Print Your printer is online and ready to print.
Printing tttttt Your printer is printing and paper is currently being
fed from tttttt, where tttttt identifies a tray.
tttttt Near End The paper supply in the tray identified by tttttt will
run out soon.
cccccc Toner Low The remaining toner of color cccccc is running low.
Fuser Unit Near Life The fuser unit is nearing the end of its working life.
Change Fuser Unit The fuser unit has reached the end of its working
life and has to be changed.
Inverter is Removed The Inverter unit has been separated from the
printer and all Finisher functions are disabled.
(Finisher/Inverter is an optional accessory.)
Invalid Data
Press ONLINE Button
Invalid data has been received by the printer. Press
the ONLINE button to clear this warning.
Change Paper in tttttt
mmmmmm
pppppp
Press ONLINE button
Please see HELP for
details
There is a mismatch between the media in the tray
and print data.
Load media of size mmmmmm and type pppppp
into tray tttttt. The message may remain for some
time after you have closed the tray.
You can have the printer ignore this error for the
current print job by pressing the ONLINE button.
You can access help details by pressing the HELP
button.
Install Paper
tttttt
mmmmmm
Please see HELP for
details
The printer has tried to take paper from an empty
tray.
Load media of size mmmmmm into tray tttttt. The
message may remain for some time after you have
closed the tray.
You can access help details by pressing the HELP
button.
Install Tray
tttttt
The printer has tried to take paper from a tray that
has been removed.
Ensure that tray tttttt is correctly located or put tray
tttttt loaded with paper back into the printer.
To Next Page
Loading...
Need help?
General
