Oki C9600 - Turning on; Changing the Display Language

C9600 User’s Guide> 42
T URNING O N
NOTE
If the display panel shows that you can either turn off or restart
the printer, press Shutdown/Restart to turn on the printer.
1. If the printer is turned off (no power), use the On/Off switch
to turn on the printer.
C HANGING THE DISPLAY LANGUAGE
To change the language shown on the display panel and used for
reports:
1. Ensure that the display panel indicates that the printer is
ready to print.
2. Enter menu mode by pressing either the Up-arrow or
Down-arrow button and press them repeatedly until Menus
is highlighted.
3. Press the Enter button to select Menus.
4. Press the Up-arrow or Down-arrow buttons repeatedly
until System Adjust is highlighted.
5. Press the Enter button to select System Adjust.
6. Press the Up-arrow or Down-arrow buttons repeatedly
until Language is highlighted.