Network configuration > 9
5. Select Install Network Card Setup link.
6. Select your language.
7. Select Oki Device Quick Setup and follow the on-screen instructions.
8. When the settings are correct, click Execute. The new settings are transmitted to
the network card but it still operates with pre-transmission settings.
9. Click Finish to validate the new settings.
10. Switch the printer off for 15 seconds and on again.
U
SING
A
DMIN
M
ANAGER
AdminManager is a powerful Microsoft Windows-based utility to configure all network
interface functions easily and intuitively via a graphical user interface.
Configuration requires a PC with a supported Windows operating system (see page 8),
running TCP/IP or IPX/SPX (NetWare).
This utility can only be used on a PC that can be connected to the network with TCP/IP or
IPX/SPX and must be used on a PC that is located on the same segment as the printer.
I
NSTALLATION
1. Insert the DVD-ROM into the DVD-ROM drive. The Setup Utility starts automatically.
If it does not start, double-click \setup.exe (in the root directory) on the
DVD-ROM.
2. Select the appropriate language.
3. Navigate to and select Network Card Setup.
4. Select Install Network Card Setup link.
5. Select your language.
NOTE
Not all utilities, features or protocols are supported by every operating
system. Please check with your support website for latest information.
To Next Page
Loading...
Need help?
General
