7. Press the release lever (B) to remove the
trapped paper from the fuser.
8. Insert the fuser unit back into posion and
push the lock levers down to lock the fuser unit.
9. To remove a sheet with its leading edge at the
front of the belt, li the plasc guard at the front
of the printer and remove the paper.
10. Remove the paper.
11. Install the image drum unit in the printer so
as to situate the K toner cartridge toward the
front of the printer.
12. Close the top cover and press down rmly so
that the cover latches closed. Lower the
scanner back into posion.
To Next Page
Loading...
