To Next PageTo Next PageWhat causes smearing or missing dots on my Oki Printer?
If your Oki Printer is smearing or missing dots, the issue could be due to the Printhead, Driver Board, Space Motor, or Carriage Cable. To resolve this, check the trouble status according to Table 6.1 for the details of the trouble.
General| Print Technology | Impact Dot Matrix |
|---|---|
| Emulations | Epson FX, IBM ProPrinter |
| Resolution | 240 x 216 dpi |
| Print Resolution | 240 x 216 dpi |
| Print Speed | 435 cps |
| Connectivity | Parallel, USB |
| Paper Handling | Continuous paper |
| Number of Pins | 9 |
| Paper Width | 76.2 - 254 mm |
| Noise Level | 57 dBA |
Essential safety guidelines for using and storing the Cut-Sheet Feeder to prevent damage and ensure proper operation.
A table detailing which Cut-Sheet Feeder models are compatible with specific MICROLINE printer models.
An overview of the Cut-Sheet Feeder models and their features for installation.
Step-by-step instructions for physically attaching the Cut-Sheet Feeder to the printer.
Procedure for safely detaching the Cut-Sheet Feeder from the printer unit.
Guidance on modifying the mounting bracket to fit different printer models.
Instructions for altering the attachment assembly for specific printer compatibility.
Important guidelines for loading paper correctly to ensure proper feeding and prevent damage.
Steps to prepare the loading tray and adjust guides for different paper sizes.
Detailed instructions on how to properly load paper stacks into the feeder.
Procedures for removing and installing the printer ribbon cartridge.
Overview of how printer control buttons operate the Cut-Sheet Feeder.
Method for advancing paper from the tray to the print start position.
Instructions on adjusting the Top of Form (TOF) for optimal print alignment.
Guidance on setting page margins, considering the CSF's automatic left margin.
How to initiate and manage printing jobs using the Cut-Sheet Feeder.
Steps to access the Cut-Sheet Feeder's menu selection mode.
How to perform a self-test to check the functionality of the Cut-Sheet Feeder.
Procedure to resolve paper jams and error conditions in the feeder.
Instructions for replenishing paper when the loading tray becomes empty.
Command to eject paper and insert a new sheet.
Command to eject a page and position a new one.
Command to insert and position a new paper sheet.
Command to eject the current page without inserting a new one.
Command for dual-bin models to select the paper input slot.
Details on the initial paper positioning and the speed of paper feeding.
Information on paper size, width, ream weight, and smoothness.
Specifications for cut form envelopes, including size, weight, and thickness.
Capacity of the paper hopper based on paper weight and texture.
Details on the stacker's paper capacity and the printer's allowable margins.
Physical dimensions (width, height, depth, weight) for different CSF models.
Details on power input, operating temperature, humidity, and vibration tolerances.
Information on the feeder's durability under impact and its reliability metrics (MTBF, Life).
