Oki Microline 4410 - Page 15

15
Group Item Settings
Set-Up (cont.) Registration 7 0.25 mm Right, 0.20 mm Right, 0.15 mm Right,
0.10 mm Right, 0.05 mm Right, 0, 0.05 mm
Left, 0.10 mm Left, 0.15 mm Left, 0.20 mm
Left, 0.25 mm Left.
Data Word Size 8, 7
[ML emulation only]
Op. Panel Function Full Operation, Limit Operation
Reset Inhibit No, Yes
Print Suppress No, Yes
Auto LF No, Yes
Auto CR No, Yes
[ML emulation only]
Print DEL Code No, Yes
[ML emulation only]
SI Pitch (10) 15 CPI, 17.1 CPI
[IBM emulation only]
SI Pitch (12) 12 CPI, 20 CPI
[IBM emulation only]
Time Out Print Valid, Invalid
Auto Select No, Yes
ESC SI Pitch 17.1 CPI, 20 CPI
[IBM emulation only]
Intr Chr Sub St Combined, Code Page Only
[Epson emulation only]
Host Interface Auto Interface, Parallel, Serial,
OKI HSP (print server installed),
Opt. Card (optional card installed)
I/F Time Out 15 sec, 30 sec, 45 sec, 1 min, 2 min, 3 min, 4 min,
5 min
Default Path Current Path, Rear Path, Front Path
Auto Path Invalid, Valid
Impact Mode Normal, Quiet, Hi-Impact Copy