OkiLAN 8100e Configuration 28
3. Select either [NDS mode] or [Bindery] mode depending on your
network environment.
4. Follow the on-screen instructions.
5. Confirm your configuration. If it is correct, select [Execute].
6. Select [Finish] button. If necessary, select [Setup]—[OKI Device
Setup] and continue your configuration.
Mode Location PSERVER/
RPRINTER
Print
Server
Queue Printer
NDS Context
should be
specified.
PSERVER mode Current Print
Server name is
used.
Set queue
name and its
volume for the
queue
creation.
Current Printer
name is used.
RPRINTER
mode
Select existing
Print Server.
Set queue
name and its
volume for the
queue
creation.
Current Printer
name is used.
Bindery File server
should be
specified.
PSERVER mode
only
Current Print
Server name is
used.
Set queue
name for the
queue
creation.
Current Printer
name is used.
To Next Page
Loading...