Oki OkiLAN 8100e - Page 93

UNIX 93
220 EthernetBoard OkiLAN 8100e Ver 01.09 FTP
Server
Name (C5300:<none>) : root
331 Password required.
Password:<CR>
230 User Logged in
ftp>
The network card logical directory structure is hierarchical. Move to the
logical directory; it is not possible to output print data to the root
directory.
2. Move to the preferable logical directory using the cd command.
Example: moving to the lp directory and confirming the current
directory.
ftp> cd /lp
250 Command OK.
ftp> pwd
257 ”/lp” is current directory
ftp>
3. Configure the transfer mode
There are two types of transfer mode: BINARY mode, in which the file
content is output as it is and ASCII mode, which converts the LF code
to the CR+LF code. If a binary file converted by the printer driver is
transferred, the transfer mode has to be BINARY mode.
Example: changing transfer mode to binary mode and verifying the
current mode
ftp> type binary
200 Type set to I.