Oki PACEMARK 4410 - LF Motor Assy

40496501TH Draft Version 65
3.3.12 LF Motor Assy
(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Remove I/F Board. (See 3.3.6)
(3) Remove Printer Unit. (See3.3.2)
(4) Remove Tractor Change Motor Assy. (See3.3.10)
(5) Unscrew 3 screws 1 and remove LF Motor 2.
(6) For installation, reverse the removal procedure.
(Note on Installation)
1. LF Motor Assy 2 should be mounted with the cord route as shown below.
2
1
[ LF Motor Assy Cord Route Fig. ]