40496501TH Draft Version 75
3.3.22 Junction Board
(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unplug all the connectors from the above.
(3) Unscrew 2 screws 1 and remove Junction Board (PRA Printed Board) 2.
(4) Unscrew 3 screws 3 and remove Junction Board Bracket 4.
(5) For installation, reverse the removal procedure.
1
4
3
3
2
3
To Next Page
Loading...
