40496501TH Draft Version 78
3.3.25 Knob Bracket Assy
(1) Remove Bail Motor. (See 3.3.11)
(2) Unscrew the screw 1 and remove the gear 2.
(3) Unscrew 2 screws 3 and remove Knob Bracket Assy 4.
(4) Unscrew 2 screws 5 and remove AG Sensor Cover 6.
(5) Unscrew the screw 7 and remove Knob Cover 8.
(6) Remove the E-ring 9, Gear 0 and Adjusting Knob A.
(7) Remove Spring Pin B, then remove Idle Gear Shaft C and CSF Drive Shaft D.
(8) For installation, reverse the removal procedure.
1
2
3
View A
View A
6
5
7
8
3
4
A
0
9
B
C
D
To Next Page
Loading...
