Oki Pro1040 - Connecting to a PC; Flow for Installing the Driver on a Computer

- 32 -
Connecting to a PC
⿟
Connecting to a PC
This section describes how to connect the printer to a computer and how to install the printer driver
from the included software DVD-ROM. You need to have a computer with a DVD drive connected for
installation.
Flow for Installing the Driver on a Computer
Connecting to a PC
Network Connection USB Connection
Connect the cable.
Turn on the printer.
Set the printer's IP address.
Connect the cable.
Turn on the computer.
On the computer, set the IP address and configure other
settings.
Install the printer driver.
Check operations from the computer.