To Next Page
L
lpetersonAug 10, 2025
How to fix smears on printouts from my Oki Printer?
- JJay KaneAug 10, 2025
If you notice smears on your printouts, replace the process cartridge. Refer to page 12 for instructions.
How to fix smears on printouts from my Oki Printer?
If you notice smears on your printouts, replace the process cartridge. Refer to page 12 for instructions.
How to change the print density on an Oki Printer?
To change the print density, adjust the Print Density settings within the Printer Engine menu.
What to do if an error message appears on my Oki Printer?
If an error message appears, follow the instructions displayed on the panel. For more details, consult Chapter 5 of the User's Manual for Basic Printer Operation.
How to change the time until power save mode on Oki Printer?
To adjust the time before the printer enters power save mode, modify the Time Before Power Save setting in the Printer Engine menu.
How to disable automatic paper cutting after a certain time on Oki Printer?
To control automatic paper cutting after a specific duration, configure the Top Cut Timer in the Printer Engine menu.
What to do if my Oki Printer is wrinkling tracing paper?
If you are experiencing wrinkles on tracing paper, set the Humidity for Tracing Paper to High Humidity in the Printer Engine menu.
General| Category | All in One Printer |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Original Size | Up to A0 |
| Copy Resolution | 600 x 600 dpi |
| Scan Type | CIS |
| Scan Resolution | 600 x 600 dpi |
| Fax Transmission Speed | 33.6 kbps |
| Duplex Printing | Yes |
| Technology | LED |
| Paper input | 2 rolls |
| Paper weight | 64 - 110 g/m² |
| Interface | USB 2.0, Ethernet |
| Paper Capacity | 2 rolls |
| Operating System Compatibility | Windows, Mac |
