Need help?Do you have a question about the OKIDATA Pacemark 3410 and is the answer not in the manual?
General| Type | Dot Matrix Printer |
|---|---|
| Print Technology | Impact Dot Matrix |
| Print Resolution | Up to 360 x 360 dpi |
| Print Width | 13.6 inches (345.4 mm) |
| Connectivity | Parallel |
| Paper Handling | Continuous forms |
| Noise Level | 55 dB(A) |
Guide to setting up the printer and connecting it to your computer.
Instructions for handling and loading various types of paper.
How to operate the printer using the front panel controls.
Information on controlling the printer via computer software.
Contains reference material for printer commands and features.
Pre-operation tasks to perform after unpacking the printer.
Step-by-step instructions for installing the platen knob.
Guide on how to properly insert the printer ribbon.
Instructions for installing the bottom feed tractor unit.
How to connect the printer to power and interface cables.
Guidance on selecting between parallel and serial interfaces.
How to adjust the head gap for optimal print quality.
Procedure to print a sample test page for verification.
Instructions for performing the "Rolling ASCII" test.
Instructions for loading continuous forms using the rear feed.
Instructions for loading continuous forms using the bottom feed.
How to use the Form Tear Off feature for continuous forms.
Procedure for loading single sheets of paper.
How to set the top of form position on the printer.
Steps to change between different paper types.
Information about the optional pull tractor.
Guide for installing the optional cut sheet feeder.
Explanation of the printer's basic control panel functions.
How to select and use different print modes.
How to select the desired print quality level.
How to adjust the character pitch for printing.
How to access and navigate the printer's menu system.
Guide on how to make selections within the printer's menu.
How the printer interacts with commercial software packages.
Information on selecting and using printer drivers for software.
A list of control codes for Epson FX emulation.
A list of control codes for IBM Proprinter emulation.
Detailed control codes for Epson FX emulation.
Information on constructing and requirements for serial cables.
Pinout and signal descriptions for serial interface.
Diagrams showing common serial cable configurations.
Information on the parallel cable requirements.
Information on how to obtain service and support for the printer.
Information on contacting your authorized dealer.
Details for the Okidata customer information center.
Information on finding Okidata service locations.
Instructions on how to order replacement parts.
Details on different methods for purchasing replacement parts.
List of available replacement parts for the printer.
Information about available optional accessories for the printer.
List of available manuals for the printer.
Specifications related to the printer's printhead.
Details on the printer's print speed at 10 characters per inch.
List of printer emulations supported by the device.
Information about the printer's interface options.
Specifications for the printer's graphics resolution.
Details on available fonts for the printer.
Information regarding the printer's reliability metrics.
Specifications related to paper types and handling.
Details on handling continuous form paper.
To Next Page
