Need help?Do you have a question about the Okofen PE 08 and is the answer not in the manual?
Details electrical connections and their designations for the boiler control unit.
Illustrates the electrical connections and layout for the boiler control unit.
Explains the meaning of LED indicators on the boiler controller for status and errors.
Provides guidance on routing cables for the boiler controller and connected components.
Describes the LED indicators on the heating controller for status and error reporting.
Outlines the electrical connection points and terminal assignments for the heating controller.
Specifies guidelines for wiring multiple heating controllers in a system network.
Presents diagrams illustrating wiring configurations for heating controller systems.
Details the procedure for removing and installing the heating controller circuit board.
Lists cable specifications and types used with the Pelletronic Touch interface.
Provides resistance and thermal voltage values for various sensors.
Shows diagrams illustrating hydraulic connections for different system configurations.
Explains the functions of navigation icons and input methods on the touch device.
Displays the primary menu structure and available submenus on the touch device.
Provides step-by-step instructions for exchanging the touch operating device.
Identifies and describes the ports and connectors on the rear of the touch device.
Details the procedure for calibrating the touch screen interface for accurate input.
Introduces the Pelletronic Online Touch feature for remote system monitoring and operation.
Lists the prerequisites for setting up and using the Pelletronic Online Touch system.
Explains the technical setup and network requirements for remote access.
Guides through configuring network settings (IP, DHCP, Port) on the touch device.
Details how to access the secure web interface for remote system management.
Provides an overview of the features and layout of the online remote maintenance portal.
Explains how to adjust the boiler's power rating by configuring heat exchanger pipes.
Covers configuring addresses for bus participants like controllers and remote controls.
Guides through learning and configuring system components like boilers and sensors.
Details the activation and configuration of the Flowtronic function.
Explains how to set and manage operating modes for the heating system and its circuits.
Describes how to view current and desired system measurements and settings.
Explains how to configure weather forecasts for optimizing system operation.
Details how to use weather forecasts to influence heating system performance for efficiency.
Covers settings and adjustments for individual heating circuits, including temperature and curves.
Explains how to configure the system for efficient use of solar energy.
Details configuration options for domestic hot water (DHW) settings and preferences.
Outlines settings for the DHW return pump, including operating modes and timers.
Provides detailed settings for solar circuits, including pump control and collector protection.
Covers configuration of accumulators, including temperature limits and pump control.
Explains parameters for regulating the entire heating system, including cascade and existing boiler integration.
Details advanced settings and adjustments for the Pellematic boiler controller.
Describes the function and assignment of the heating main pump, used as a backup.
Covers overall system settings like chimney, favorites, and network configuration.
Details software configuration, updates, and device management.
Provides information on identifying, understanding, and resolving system malfunctions and fault texts.
General| Brand | Okofen |
|---|---|
| Model | PE 08 |
| Category | Heating System |
| Language | English |
To Next Page
