DHW Return Pump settings
97
Maintains the temperature of the DHW within this range during a timed or ma-
nual ON period.
Only functions when the operating mode of the DHW has to be ON or AUTO.
If the operating mode is set AUTO, there has to be a demand for the burner.
Raises DHW cylinder temperature to Legionella pasteurisation temperature 65°
on a chosen day each week. You can deactivate this function.
Back to Main menu.
13.10 DHW Return Pump settings
DHW Return pump settings has following menu
items:
• Mode
• Switch Off Temperature
• Switch On Hysteresis
• Pump Release Temp
• Display name
• Values
• Time 1
• Time 2
In this sub menu item, customer-specific adjust-
ments can be set. Therefore detailed information
is to be found in the manual for the End-user.
Operating Manual PELLEMATIC® PE(S)(K)(B) 10 — 56
To Next Page
