5.Your weight reading will be displayed
first.
Once the reading is steady it will
flash once.
6.The display will then show“ ”
in a series whilst the calculation is
performed and then your measurements
will be displayed.
The measurements will be displayed in a cycle of body weight
(e. g. 52.8 kg) , fat percentage ( e.g. 23.8% ), hydration
percentage ( e.g. 52. 3%), muscle percentage (e. g. 37. 2%),
bone percentage ( 12. 0%) and kilocalorie (e. g. 1840).
The readings will be displayed in a sequence of 3 cycles, after
which the scale will turn off automatically.
Notes on Viewing Measurements
After you select a desired user code to view measurements
(following steps 1 to 3 above) , press to display the
measurements. The measurements will be displayed in a
sequence of 3 cycles.
You can press / to quickly view measurements.
UNDERSTANDING YOUR READING
The fat/hydration content assessment chart below is only for reference.
87
Downloaded from www.vandenborre.be
To Next Page