Need help?Do you have a question about the Oldham ctx 300 and is the answer not in the manual?
General| Brand | Oldham |
|---|---|
| Model | ctx 300 |
| Category | Security Sensors |
| Language | English |
Provides general information and instructions for using the CTX 300 device.
Explains the meaning of various icons and symbols used throughout the manual.
Details critical safety precautions and warnings for the operation and installation of the device.
Highlights key operational details, warranty conditions, and usage limitations for the product.
Outlines the disclaimers and limitations of liability for the manufacturer regarding product use.
Provides an overview of the CTX300 gas detectors and their intended applications.
Details the different sensor types, detected gases, and detection methods for CTX 300.
Guides on the optimal placement and mounting procedures for the gas detectors.
Provides dimensions and drilling diagrams for the physical installation of the CTX 300.
Explains wiring specifications and connection diagrams for various sensor types.
Describes the initial steps and indicators for turning on the CTX 300 sensor.
Details the output signals and their states for the analog current loop of the CTX 300.
Offers advice and required equipment for calibrating the CTX 300 gas detector.
Provides step-by-step instructions for calibrating the CTX 300 with display (excluding O2).
Details the calibration procedure for Oxygen (O2) sensor types of the CTX 300.
Outlines the calibration process for semiconductor type sensors of the CTX 300.
Explains the calibration steps specific to the CTX 300 Carbon Dioxide (CO2) sensors.
Describes the conditions and procedure for replacing a sensor in the CTX 300 unit.
Provides instructions for the environmentally responsible disposal of the CTX 300 device.
Lists spare parts and accessories for CTX/COX 300 toxic and oxygen sensor models.
Details spare parts, replacement sensors, and accessories for CSC 300 semiconductor sensors.
Lists spare parts, replacement sensors, and accessories for CTX 300 CO2 sensors.
Defines general principles for the design and manufacture of grounding devices for Oldham instrumentation.
Lists relevant French and European regulations applicable to electrical installations and safety.
Refers to attachments and particular specifications for the general design of grounding devices.
To Next Page
