To
adjust the
HUD
so
you can see
it
properly:
1~.
Start your engine and turn the
HUD
dimer dial all
I
the, way up.
When the headlamps
are
off,
the
HUD
image will
When
the headlamps
are
on, the
HUD
image
be at a preset daytime brightness.
brightness
is
controlled by the dimmer dial.
2.
Adjust your seat, if necessary, to a comfortable
position.
'
3.
Press the up arrow on the image switch until the
HUD
image stops moving. Then press the down
arrow until the image is as low as possible but in full
view.
4.
Turn the
HUD
dimmer dial down until the
HUD
image is no brighter than necessary. To turn the
HUD
off,
turn
the dial all the way down.
If the sun comes out, it becomes cloudy, or if you turn
on
your headlamps, you may need to adjust the
HUD
brightness again. Polarizing sunglasses could make the
HUD
image harder to see.
2-56
To Next Page
Loading...
