.,’
I
nrn Signal and Lane Change
Indicator
The turn signal has two upward (for,Right) and two
downward (for Left) positions. These positions allow
you to signal a turn or a lane, ch&ge.
To signal a turn, move the lever all the way up or down.
When the turn
is
finished, the lever
will
return
automatically.
’
A
green
arrow
on the
-
instrument panel will flash
in’the direction
of
the turn
e
br lane change.
,*
I
I.
..
To signal a lane change, just raise or lower the lever
until the green
arrow
starts. to flash. Hold
it
there until
you complete your lane change. The lever will return
by
itself when you release it.
..
As
you signal a turn or a lane change, if the arrows don’t
flash but Just stay on, a signal bulbmay be burned out
and other drivers won’t see your turn signal.
If
a bulb is burned out, replace it
to
help avoid
an
accident.
If
the green arrows don’t
go
on at all when you
signal
a
turn, check the fuse (see “Fuses and Circuit
Breakers” in the Index) and for burned-out bulbs.
A
chime will sound if you leave your turn signal on for
more than,
1/2
mile
(0.8
km):
Headlamp HighLow Beam
I
I
To change your headlamps
from low beam to high
beam, or high
to
low, pull
the multifunction lever all
the way toward you. Then
release it.’When the high
beams are
oni,
a blue light
on the instrument panel also
will be on.
2-26
..
’.
.
.-.
-..
To Next Page
Loading...
