Air Conditioning
with
Automatic and
Auxiliary Temperature Control
With this system you set a temperature. You can then
either let the system adjust air flow and force to
maintain the temperature, or you can manually adjust
1
the flow and force, The system works best if you keep
1
your windows closed while usingit.
System
Controls
Fan
Knob
The left knob selects the force of air
you
want when the
system is not in AUTO. The display will show the
speed. To turn the system
off,
push the knob.
Driver Temperature
Knob
The right knob sets the temperature for the entire system
when the light on the
PASS
button isn’t lit.
If
the light is
lit, the knob sets the temperature for the driver. Turn the
knob toward red (clockwise) to r&ise the temperature.
Turn it toward blue (counterclockwise) to lower the
temperature. The display
will
show your selection for a
few seconds, then the outside temperature will show. If
you push the knob, the system will control the fan speed
and air flow. AUTO will show
on
the display.
To Next Page
Loading...
