If
E
and a number appear in the display, the tape won’t
play because of an error.
E10:
The tape is tight, and the player can’t turn the
tape hubs. Remove the tape. Hold the tape with the
counterclockwise with’a pencil. Turn the tape over
-:;I.
and try to turn the right hub. If the hubs do not turn
.I
.,X
easily, your tape may be damaged and should not be
,
.
1
-.).:,?
.
..
used in the player. Try a new tape to make sure your
1
.
--
a
:..
player is working properly.
p
--
’
.
.:
open end down and try to turn the right hub
.,
..
. ~
i(
-
:@.
’i
SEEK:
Press the up or down arrow to search for the
next or previous selection on the tape. Your tape must
have at least four seconds of silence between each
selection for
SEEK
to work.
SCAN:
Press this button to listen to each selection for a
few seconds. The tape will go to the next selection, stop
for a few seconds, then go on
to
the next selection. Press
the button again to stop scanning. The sound will be
muted while scanning, and SCAN will appear
on
the
display.
Ell:
The tape is broken.
E12
Communication problem.
While the tape is playing, use the VOL, FADE, BAL,
FWD:
Press this button to advance quickly to another
TREB
and
BASS
controls
just
as you do for the radio.
part
of
the tape. Press the button again to play the tape.
Other controls may have different functions when a tape
PROG:
Press this button to change the side of the tape
is inserted. The display will show TP and an arrow to that is playing.
show which side of the tape is playing.
/
’-.
.:,
.
,
*:
,.;)
,’..’!’.
.
REV:
Press this button to reverse the tape rapidly. Press
’
.,K
.
’
I.
it again to play the tape.
NR:
Press this button to reduce background noise.
Your tape bias is set automatically. When
a
metal or
chrome tape is inserted, HI-BIAS appears on the
display.
If
you want to insert a tape when the ignition is
off, first press EJECT or RCL.
Dolby@
B
Noise Reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“Dolby” and the
On@
symbol are trademarks of Dolby
Laboratories Licensing Corporation.
3-12
To Next Page
Loading...
