6.
Then fill the coolant recovery tank to the
COLD
7.
Put the cap back
on
the coolant recovery tank, but
mark.
-
leave the radiator pressure cap
off.
8.
Start the engine 'and let it
run
until you can feel the
upper radiator hose getting hot. Watch out for the
engine fans.
filler neck may be lower. If the level
is
lower, add
more of the proper
mix
through the filler neck until
the level reaches the base of the filler neck.
9.
By this time the coolant level inside the radiator
5-21
~.
To Next Page
Loading...
