Oldsmobile 1995 Cutlass Supreme - Page 234

~~ ~~ ~ ~~~
‘1
~ ~~
I
If you fid that the headlamp aiming needs adjustment, 3. Check the vertical aim indicator. The bubble should
follow these steps:
Start with the horizontal aim. Don’t try to adjust the
vertical aim first.
1. Check the horizontal aim indicator. The pointer
should be lined up with 0 (zero).
be centered on 0 (zero).
4. If the bubble isn’t on
0 (zero), turn the
vertical aiming screw
to adjust the aim.
2. If the pointer isn’t at
0 (zero), turn the
horizontal aiming
screw to adjust the
aim.
I
i
6-30