2.
Unclip the bulb carrier and pull it out.
I
r
To
remove the stoplamp lens.
to
clean the
window, remove the two nuts on either side
of
;
the housing.
3.
Pull out the bulb.
Center
High-Mounted Stoplamp
(4-DOOr
Models)
4.
Push in
a
new bulb.
I
5.
Clip
the bulb carrier back into place.
6.
Replace the cover and screws.
1.
Remove the two screws from the cover.
2.
Pull down the cover.
6-38
\
To Next Page
Loading...
