I
Make sure the release button
on
the buckle is
positioned
so
you would be able to unbuckle the
safety belt quickly
if
you
ever had to.
I
21
’
’Push the latch plate into the buckle until it clicks.
Pull up
on
the latch plate to make sure it
is
secure.
When the shoulder belt is pulled out
all
the way, it
will lock.
If
it does; lit it go back
all
the way and
.start again.
If
the belt is not long enough, see “Safety Belt
Extender” at the end
of
this section.
I.
1.
Pick
up
the latch plate and pull the belt across you.
Don’t let
it
get
twisted.
The shoulder belt may lock
if
you
pull
the belt across
you very quickly.
If
this happens, let the belt
go
back
slightly
to
unlock it. Then pull the belt across
you
more slowly.
To Next Page
Loading...
