It goes to a heavy unpainted metal part on the engine
of
the vehicle with the dead battery.
12.
Attach the cable at least
18
inches
(45
cm) away
fiom the dead battery, but not near engine parts that
move. The electrical connection
is
just as good
there, but the chance of sparks getting back to the
battery is much less.
Now start the vehicle with the good battery and
run
the engine for a while.
Try to start the vehicle with the dead battery.
If
it
won’t start after
a
few tries,
it
probably
needs service.
no
I
13.
Remove the cables
in
reverse order. Take care that
they don’t touch each other or
any
other metal.
A.
Heavy Metal Engine
Part
B.
Good Battery
C.
Dead Battery
5-7
I
To Next Page
Loading...
