To change modes:
1.
Close
all
doors and
turn
the ignition on. Keep all
2.
Press and hold the driver’s power door lock switch
3.
Press the LOCK button on the Remote Keyless Entry
doors closed throughout this procedure.
through Step
4.
transmitter. The automatic door locks will remain in
the current mode.
Delayed
Locking
4.
Press the LOCK button on the transmitter again.
Each time the transmitter’s LOCK button is pressed,
the mode will advance by one, going from
3
to
0
to
1,
etc.
Note: The door locks will cycle according to the
mode entered while customizing the memory door
locks. (Mode
“0”
has no feedback).
5.
Release the power door lock switch. The automatic
door locks will remain in the most recent
mode selected.
This feature lets the driver delay the actual locking
of
the vehicle. When the power door lock switch
is
pressed
with the key removed from the ignition and the driver’s
door open, a chime will sound three times to signal that
the lock delay mode is active. When
all
doors have been
closed, the doors will lock automatically after five
seconds. If any door is opened before this, the
five-second timer will reset itself once
all
the doors have
been closed again.
Pressing the door lock switch twice within two seconds
will override this feature.
Personalization Programming
The delayed locking feature can be turned on or
off
for
each remote transmitter.
To turn the feature on:
1.
Press and hold the power door lock switch
throughout
this
procedure. All the doors will lock.
2.
Press the
UNLOCK
button on the remote
transmitter. The lock delay is still
off
and all doors
will remain locked.