Oldsmobile 1996 88 - Page 216

6.
7.
Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine fans.
By this time, the coolant level inside the radiator
filler neck may be lower.
If the level is lower, add
more of the proper DEX-COOL@ coolant mixture
through the filler neck until
the level reaches the
base
of the filler neck.
I
8.
Then replace the pressure cap. At any time during
this procedure if coolant begins to flow out of the
filler neck, reinstall the pressure cap. Be sure the
arrows
on the pressure cap line up like this.
5-22