Removing the Flat Tire and
Spare Tire
Installing the
1.
Use the wheel wrench to loosen the wheel nuts, but
don't remove them.
2. Attach the wheel wrench to the jack, and rotate the
wrench clockwise to raise the jack head a few inches.
3.
Near each wheel well
is
a notch in the frarne to put
the jack head into. The front notch is
10
inches
(25 cm) back from the front wheel well. The rear
notch
is
8
inches (25 cm) forward from the rear
wheel well.
To Next Page
Loading...
