Cleaning Vinyl
Use warm water and a clean cloth.
0
Rub with a clean, damp cloth to remove dirt.
You
Things
like
tar, asphalt and shoe polish will stain
may have to
do
it more than once.
if you don’t get them off quickly. Use a clean cloth
and a vinylfleather cleaner. See your retailer for
this product.
Cleaning Leather
Use a soft cloth with lukewarm water and
a
rnild soap or
saddle soap and wipe
dry
with a
soft
cloth. Then, let the
leather dry naturally. Do not
use
heat to
dry.
0
For stubborn stains, use a leather cleaner. See your
Never
use oils, varnishes, solvent-based
or
abrasive
retailer for this product.
cleaners, furniture polish or shoe polish on leather.
Soiled or stained leather should be cleaned
immediately.
If
dirt is allowed to work into the
finish,
it
can harm the leather.
Cleaning the
Top
of
the Instrument Panel
Use only mild soap and water to clean the top surfaces
of
the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult
to
see through the windshield
under certain conditions.
Care of Safety Belts
Keep belts clean and dry.
Do
not bleach or dye safety belts. If you do, it
may severely weaken them.
In
a crash, they
might not be able to provide adequate protection.
Clean safety belts
only
with mild
soap
and
lukewarm water.
-
-
.
~-
~~ ~ ~ ~~
-~
-~
~~
__
~=
I
6-43
To Next Page
Loading...
