Care
of
the
Head-Up
Display
Clean the inside of the windshield as
needed to remove any dirt or film that
reduces the sharpness or clarity of the
HUD image.
To Clean the HUD:
Spray household glass cleaner on a
soft,
clean cloth. Wipe the HUD lens gently,
then
dry
it. Do not spray cleaner
directly on the lens, because the cleaner
fluid could leak inside the unit
if
you do.
If
You
Can’t See the HUD Image
When the Ignition
is
On:
Is anything covering the HUD unit?
Is
the HUD dimmer control close
Is the HUD image adjusted to the
enough to
MAX?
proper height?
Still no HUD image? Check the fuse
in the
CLSTR
position in the glove
box
fuse panel. See the
Index
under
Fuses
G
Circuit Breakers.
If the
HUD
Image is Not Clear:
It could be
too
bright. Move the HUD
dimmer control closer
to
OFF.
You may need to clean the windshield
and HUD lens.
Your windshield is part of the HUD
system. If you ever have to have
a
new
windshield, be sure to get one designed
for HUD. If you don’t, the HUD image
may look blurred and out of focus.
To Next Page
Loading...
