HEAT:
When outside temperatures are
cold, push
HEAT.
Slide the
temperature control lever to a
comfortable level. For maximum
heating, slide it all the way to the right.
This setting will send
most
of the
heated air through the ducts near the
floor. The rest will come out of the
defroster vents and side window
defogger vents.
There are two settings for clearing your
windows. For each setting, adjust-the
temperature control as desired. The air
conditioner compressor will run in
these settings to remove,moisture
from-
the air when the temperature is above
freezing.
This setting allows half of
the air to flow to the floor
heater ducts, and half to go
8Qjfl
to the~windshield and side window
vents located in the windshield pillars.
Use this setting to warm passengers
while keeping the windshield clear.
The
DEF
setting directs
90%
of
the air
through the defroster vents and the side
window vents, and
10%
to the floor.
To rapidly defrost the windshield, slide
the temperature control .lever all the
way to
WARM
and press the
DEF
button.
Adjust the fan to the highest speed.
105
To Next Page
Loading...
