EasyManua.ls Logo

Oldsmobile Cutlass Supreme 1994 - Page 109

Oldsmobile Cutlass Supreme 1994
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CLIMATE
CONTROL
ELECTRONIC
0
n
0
0
0
1
Electronic Climate Control
(OPTION)
This system allows you to set the
temperature
you
want. It also lets you
choose automatic air flow and direction
control, or air flow and direction
settings you select. Your vehicle also
has the flow-through ventilation system
described later in this section.
The digital screen displays the outside
temperature, the inside temperature
setting and the fan speed.
When you select the
AUTO
mode, the
air conditioner compressor
will
operate
if
the outside temperature is above
freezing.
The air conditioner compressor also
operates in
DEFOG, DEF
(Defrost)
and
BI-LEV
(Bi-Level) when the
outside temperature is above freezing.
COOL/WARM:
Sets the interior
temperature you want. Press
COOL
to
lower the inside temperature setting;
press
WARM
to raise the setting. The
temperature you set will be displayed on
the digital screen.
Once you set the temperature, the
system will try to maintain the set
temperature, whether. you are using the
heating or cooling controls.
Your system has an interior
temperature sensor that dete.cts
increased interior temperature caused
by sunlight. To keep you comfortable, it
reduces the interior temperature by as
much as
5°F
(3°C)
below the setting on
the digital screen.
AUTO:
To
allow the system
to
automatically control the temperature,
air distribution and fan speed:
1.
Set the temperature
you
want with
the
COOL/WARM
switch.
2.
Press the
AUTO
switch. The
AUTO
symbol will appear on the digital
screen.
The system will approach the
temperature you select as quickly as
possible.
For
most efficient operation,
just set the system temperature where
you would like it and drive away.
You
may notice a delay of three or four
minutes before the blower comes on.
OUTS TEMP:
Press to have the
outside temperature displayed
on
the
digital screen. Press
again
to return
to
the inside temperature setting.
If
the system is left in the outside
temperature mode, the outside
temperature will be displayed except
when changing the inside temperature
setting using the
COOL/WARM
switch. The display will return to the
outside temperature setting in about
five seconds.
107

Related product manuals