Comfort
Controls
&Audio
Systems
112
VOLUME
TUNE
TREB
BASS
II
II
SCAN
SEEK
1
23
4
SET
I”)
lol
II
I
I/
I
I
II
I
ll
1
I
9MIFM
Sfereo
Radio
The digital display indicates information
on time or radio station frequency, the
AM
or FM radio band, whether the
station is in stereo, and other radio
€unctions.
VOLUME:
Turn the upper knob to
turn the radio on or
off,
or to adjust
volume. Press it to change the display
between the clock and the radio station
frequency when the radio is on.
The control ring behind the
VOLUME
knob adjusts the left/right speaker
Jalance.
TUNE:
This lmob has two functions.
Turn it to the.left or right to tune in
radio stations (the radio station
frequency will be .displayed on the
digital screen). Press this hob to
change between the
AM
and
FM
bands.
The control ring behind the
TUNE
knob adjusts the front/rear speaker
balance.
TREB (Treble):
Slide this lever up
to
increase treble, or down to decrease it.
BASS:
Slide this lever up to increase
bass, or down to decrease it.
SCAN:
Press to listen for a few seconds
to the next station on the AM or
FM
band; the scan will continue every few
seconds until you press
SCAN
again to
stop on a particular station. You can
also
press the upper hob
(VOLUME
)
to stop the scan.
SEEK:
Each time you press
SEEK,
you
will tune in the next station higher on
the radio band.
To
Preset
Radio Stations:
Using the four pushbuttons numbered
1-4,
you can set up to
14
radio stations
(seven AM and seven FM)
.
1.
Use the lower knob
(TUNE)
to tune
in the station you want.
2.
Press
SET.
The
SET
indicator will
appear on the digital screen for five
seconds.
3.
While the
SET
indicator is displayed,
press one of the four pushbuttons.
4.
Repeat steps
1-3
for each of four
AM
and four FM stations.
Up to three additional stations on each
band may be preset by “pairing”
pushbuttons:
To Next Page
Loading...
