6.
Connect the red positive
(+)
cable to
the positive
(+)
terminal of the
vehicle with the dead battery. Use a
remote positive
(+)
terminal
if
the
vehicle has one.
7.
Don’t let the other end touch metal.
Connect it to the positive
(+)
terminal of the good battery. Use
a
remote. positive
(+)
terminal
if
the
vehicle has one.
8.
Now connect the black negative
(-)
cable to the good battery’s negative
(-)
terminal. Don’t let the other end
touch anything until the next step.
The other end
of
the negative cable
doesn’t
go to the dead battery. It goes
to a heavy unpainted metal part on
the engine
of
the vehicle with the
dead battery.
9.
Attach the cable at least
18
inches
(45
em) away from the dead battery,
but not near engine parts that move.
The electrical connection is just as
good there, but the chance of sparks
getting back to the battery is much
less.
10.
Now start the vehicle with the good
battery and run the engine for a
while.
11.
Try to start the vehicle with the
dead battery.
If
it won’t start after a
few tries, it probably needs service.
153
To Next Page
Loading...
