3.
Remove the wing nut securing the
compact spare tire and spacer by
turning it countercloclwise. Then lift
off
the spacer and remove the spare
tire.
4.
Remove the bolt securing the jack
and wrench by turning
it
countercloclwise. Then remove the
jack and wrench.
5.
If
there is a wheel cover, remove it by
using the wedge end
of
the wrench to
pry gently in
a
notch at the edge.of
the center cap.
Do
not use a tool that
is narrower, such as a screwdriver, to
pry in this notch.
You
may damage
the wheel cover or the center cap.
You
may also have plastic nut caps.
Loosen the plastic nut caps with the
wheel wrench. They won’t come
off.
Then pry along the edge of the wheel
cover until it comes
off.
167
To Next Page
Loading...
