Spare fuses and a fuse puller are located
in the glove box lid.
To
remove the
cover, press in on both ends of the
cover and pull it
off.
Place the wide end of the fuse puller
over the plastic end of the fuse. Squeeze
the ends over the fuse and pull it out.
To
identify and check fuses, refer to the
charts on the following pages.
U
,ook
at the silver-colored band inside
.he fuse.
If
the band is broken
or
nelted, replace the fuse.
Be
sure you
*eplace
a
bad fuse with a new one
of
the
dentical size and rating.
221
To Next Page
Loading...
