Seats
&
Restraint Systems
34
-
2.
Slide the guide under and past the
belt. The elastic cord must be under
the belt. Then, place the guide over
the belt, and insert the two edges
of
the belt into the slots
of
the guide.
3.
Be sure that the belt is not twisted
and it lies flat. The elastic cord must
be under the belt and the guide on
top.
4.
Buckle the belt around the child, and
make sure that both the lap belt and
the shoulder belt are secured
properly. Make sure that the shoulder
belt crosses the shoulder. See
Safety
Belts, Rear Seat Passengers
in the
Index.
To
remove and store the comfort
guides, just perform these steps in
reverse order. Squeeze the belt edges
together
so
you can take them out from
the guides. Pull the guide upward to
expose its storage clip, and then slide
the guide onto the clip. Rotate the guide
and clip inward and in between the
seatback and the interior body, leaving
only the loop
of
elastic cord exposed.
To Next Page
Loading...
