Securing
a
Child Restraint in
a
Rear Outside Position’-
2-Door
Oldstnobiles
You’ll be using the lap-shoulder belt.
See the earlier section about the top
strap if the child restraint has one.
1.
Put the restraint on the seat. Follow
the instructions for the child
restraint.
2.
Secure the child in the child restrain1
as the instructions say.
3.
Pick up the latch plate, and run the
lap and shoulder portions of the
vehicle’s safety belt through or
around the restraint. The child
restraint will show you how. Tilt the
latch plate
to
adjust the belt if
needed. If the shoulder belt goes in
front of the child’s face or neck, put it
behind the child restraint.
4.
Buckle the belt. Make sure the
release button is positioned so.you
would be able to unbuckle the safety
belt quickly
if
your ever had to.
37
To Next Page
Loading...
