MAX:
This setting recirculates much of the air inside
your vehicle and sends it through the instrument panel
outlets.
The
air conditioning compressor will run
automatically in this setting unless the outside
temperature is below
40°F
(4.5
"C).
(Even when the
compressor is running, you can control the temperature.)
,+
e
fl
VENT
This setting brings in outside air and
directs
it
through the instrument panel outlets.
+fl
BI-LEVEL:
This setting brings in outside air and
directs it two ways. Half
of
the air is directed through
the instrument panel outlets. Most of the remaining air is
directed through the floor ducts and a little to the defrost
and side window vents.
+H
FLOOR:
This
setting sends most of the air
through the ducts near the floor. The rest comes
out
of
the defroster and side window vents.
+e
e
w.
+'
DEFOG:
This setting allows half of the air to go
to the
floor
ducts and half to the defrost and: side
window vents.
DEFROST
This setting directs most of the air
through the defrost and side window vents. Some
of
the air goes to the floor ducts.
The
air conditioning
compressor will run automatically in
this
setting unless
the outside temperature is below
40°F
(4.5"C).
(Even when the compressor is running, you can control
the temperature.)
Air
Conditioning
Compressor Button
Press the A/C button to operate the air conditioning
compressor.
The
indicator light above the button will
glow when the button
is
pressed. You don't have to
press the button to run the compressor in
MAX
or DEFROST.
To Next Page
Loading...
