EasyManua.ls Logo

Oldsmobile cutlass supreme 1996 - Care of Safety Belts

Oldsmobile cutlass supreme 1996
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning Vinyl
Use warm water and a clean cloth.
0
Rub with a clean, damp cloth to remove dirt. You
may have to do it more than once.
0
Things like tar, asphalt and shoe polish will stain
if you don’t get them
off
quickly. Use a clean
cloth and a GM Vinymeather Cleaner or an
equivalent product.
Cleaning Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap.
0
.For stubborn stains, use a GM Vinymeather Cleaner
or an equivalent product.
0
Never
use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish on leather.
0
Soiled leather should be cleaned immediately.
If
dirt
is
allowed to work into the finish, it can harm the leather.
Cleaning the
Top
of
the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to see through the windshield
under certain conditions.
Care
of
Safety Belts
Keep belts clean and dry.
I
A
CAUTION:
Do
not bleach or dye safety belts. If you do, it
may severely weaken them. In a crash, they
might not be able to provide adequate protection.
Clean safety belts only with-mild soap and
lukewarm water.
6-53

Table of Contents

Related product manuals