How
to
Check
Because this operation can be a little difficult, you may
choose to have this done at your Oldsmobile retail
facility Service Department.:
If
you do it yourself, be sure to
follow
all
the instructions
here, or you could get a false reading on the dipstick.
NOTICE:
Too
much or too little'fluid can damage your
transaxle.
Too
much can mean that some
of
the
fluid. could come out and fall on hot engine parts
or
exhaust system parts, starting' a fire. Be sure to
get an accurate reading
if
,you check your
transaxle fluid.
Wait at least 30 minutes before checking the transaxle
fluid level if you have been driving:
0
When outside temperatures, are above 90°F (32°C).
At high speed for quite a while.
0
In
heavy traffic
--
especially in hot weather.
0
While
pulling a trailer.
To
get the right reading, the fluid should be at normal
operating temperature,' which is
..I
80°F
to 200°F
1
(82°C to 93°C).
Get
the vehicle warmed
up
by driving about
15
miles
.
(24
km)
when outside temperatures are above
50°F
(10OC).
If
it's colder than
50°F
(lO"C), you may
have to drive longer.
Checking the Fluid Level
0
0
'0
0
Park your vehicle on a level place. Keep the
engine running.
With the pqking brake applied, place the shift lever
in
PARK (P).
With your foot on the brake pedal, move the shift
lever through each gear range, pausing for about
three seconds in each range. Then, position the shift
.
lever in PARK
(P).
Let the. engine run at 'idle for three to five minutes.
6-18
To Next Page
Loading...
